clyde towbar manual

A general inspection should be made to determine if any damage was sustained in transit. If any damage was sustained the transportation company should be notified immediately. OPERATING INTSTRUCTIONS To attach towbar to plane remove ball detent pin and lift lever back, this opens the head. After making connection close the head by pressing the lever back down. (Note: Replace ball detent pin, this locks the head in the closed position.) MAINTENANCE Every six months grease the axle lift pivots with the grease zerks provided. Annually the wheels should be removed and the hub bearings repacked with grease. PARTS ORDERING This illustrated parts manual completely identifies all detailed parts of the TB-2716 towbar. For more information click here See User Agreement These assets are Used and therefore Inspection is Highly Recommended Prior to Bidding. Collection of assets is the responsibility of the purchaser. Delivery is not available. Asset packaging and removal are the purchasers responsibility in the time frame specified for this sale. Goods not collected within this time frame will be deemed abandoned. By registering and bidding you have agreed to our terms and conditions of sale. If necessary please familiarise yourself with them prior to bidding on items in this sale. Graysonline will not be organising transport of goods. Please consider this prior to bidding. BUYERS PLEASE NOTE: Collection of assets is the responsibility of the purchaser. Inspection of the assets is highly recommended. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given. Graysonline Staff are here for security purposes only. Please make sure you have people to help you load your items and right transport. Items must be inspected before removal from Grays as refunds or exchange are not given under any circumstances.

• clyde towbar manual, clyde towbar manual, clyde towbar manual pdf, clyde towbar manual download, clyde towbar manuals, clyde towbar manual free, clyde towbar 15f2284 parts manual.

Don't see what you need. Is this not the manual you are looking for. Contact us! We've got a large selection of hard copy manuals available to purchase. Where to Buy.Towbars. Clyde Towbar Heads are heat-treated for longer life and zinc plated for longer corrosion resistance. Clyde Machines, Inc. Towbars can be CE certified Don't see what you need. Is this not the manual you are looking for. Contact us! We've got a large selection of hard copy manuals available to purchase. Don't see what you need. Is this not the manual you are looking for. Contact us! We've got a large selection of hard copy manuals available to purchase. Towbar manufactured by Clyde Machines, Inc. Glenwood, Minnesota. Goods shall not be returned to Seller or modified at Sellers expense without Sellers consent in writing. This warranty does not cover damage caused by improper use, installation, overloading, accident, neglect or harmful alterations or repairs made by others, weather conditions and acts of God. The Buyers remedies with respect to defective good shall be exclusively limited as above provider and in no event shall the Seller be liable for consequential damage. Components purchased by the Seller are subject to the warranty policy of the original equipment manufacturer, and Seller will assist the Buyer in resolving any warranty claims if such action is required. CLYDE MACHINES INC. P.O. BOX 194 GLENWOOD, MN 56334 TEL. (320) 634-4504 FAX. (320) 634 4506 Page 2 INTRODUCTION This manual contains instructions for operating and maintaining Model TB-2716 Towbar manufactured by Clyde Machines, Inc. Glenwood, Minnesota. Illustrated breakdowns of all parts used in the towbar are included for identification of parts and parts ordering information. PREPARATION FOR USE Model TB-2716 has been designed for towing a B-737 aircraft. The towbar has been lubricated and adjusted at the factory and no additional preparation is required.

PLEASE NOTE: For safety reasons, all visitors into the warehouse must wear fully enclosed footwear, no thongs or sandals allowed. Our Privacy Policy contains information about how you can access and correct your personal information, how to make a complaint, and how we deal with complaints. NSW Liquor Licence LIQP770010049 Motor Dealer Licence: NSW MD13910, VIC LMCT11156, SA MVD277714, QLD 1700072, WA MD25136. NSW Motor Vehicle Recycler Licence: M057736 Grays (NSW) Pty Ltd is a credit representative (number 509214) of CarLoans.com.au Pty Ltd (Australian Credit Licence 433137). Final testing and inspection left to end user after final assembly has been completed. Final testing and inspection left to end user after final assembly has been completed.Final testing and inspection left to end user after final assembly has been completed.Choose from several types of aircraft ladders and maintenance equipment, including our Aircraft Maintenance Ladder, Helicopter Maintenance Platforms, Aircraft Wing Inspection Ladders, Aircraft Wheel Well Ladder, and a few varieties of Maintenance Stands. Click on each type of product to see a pricing table that will give you an idea of the total price based on the model and size you choose. We can also create an Aircraft Maintenance Platform or Stand that is custom designed to your exact specifications. Built with durability, safety and ergonomics in mind, our line of aircraft maintenance ladders and platforms -- like all our industrial platforms, ladders, furniture and other products -- are designed to offer dependable service for many years to come. Call us today for more information or to get a quote on freight rates to your location. PlatformsandLadders.com can provide Aircraft Maintenance Ladders or Platforms for your fixed base operation.

Most lots have pictures assigned to them. These should be taken as a guide only. Please note that personal or company cheques will not be accepted. To assist in the processing of payments please have funds available. All ORPs are prices supplied by the manufacturer (or retailer) of the item at the time of the items original sale, and therefore such ORPs may not be current at the time of the online auction of the item. Graysonline takes no responsibility for the display of ORPs on any item it offers for sale at an online auction on its site, and hereby advises all bidders to satisfy themselves as to the value of the item being auctioned. There are some exceptions to this, however. There is no limit to the number of times an online auction can be extended. This makes graysonline work more like a live auction where the bidding does not stop as long as there is still interest in the product, rather than assigning an arbitrary cut-off time.GraysOnline will provide: Safety information relating to the condition of the item of plant for sale (Plant Hazard Reports). Site Access, PPE and Removal of Plant requirements are listed under the Inspection and Collection Headings. Please note: Persons under the age of 15 years will not be permitted onsite. It is a condition of entry to site that all visitors comply with any directions given by GraysOnline staff or their representatives. Persons wearing thongs or sandals will not be permitted inside the warehouse. Viewing is for selected items Only. Bids on assets in this sale should be made based on your inspection and assessment of the goods. Descriptions and photographs should be used as a guide only. If you are unsure do not bid as no refunds will be given.Purchasers cannot pick up until full invoice is paid. Goods will only be released with correct buyer details being provided (Full Buyer name, Sale and Lot number and ID). Assets must be collected on Monday 4th August 2014 between 9:00am and 4:00pm.

All linkages and moving parts should be checked for wear and lubricated. The actuator handle should be checked to make sure it positively locks into position. And finally, if the head is of a pivot design, the pivot bolt should be removed to check its condition. If a crack is discovered, the best idea is to take the unit to certified welder for repairs. Spending a little more now can save a lot later. If the towbar is bowed from end to end, it should be taken out of service immediately until the body can be replaced. This also lifts the towbar wheels above the ground after the unit is connected to the aircraft. The manual pump should be checked for leaks and the proper fluid level. The hoses to the lift cylinder should be checked for cracks, leaks, and a deteriorating outer sleeve. The lift cylinder should be checked for leaks around the gland seal as well. The wheels should also be checked for dents, straightness, and cracks near the lug holes. The wheel hubs should be disassembled every two years. At this time, the bearings should be cleaned, inspected, and repacked with fresh grease. The wheel seals should be replaced during assembly as well. The rotating carriage and axle shaft should be checked for cracks, tight hardware, and overall straightness. If it is a solid, welded-on design, it should be closely inspected for cracks and deformation. If it is a swivel-type lunette, it should be disassembled. The threaded shaft should be checked for straightness, deformation, and cracks. The shaft’s threaded area should be checked for stripped, missing, or pulled threads. The shaft’s nut should be of a locking design and the threads should be thoroughly checked as well. The assembly should be put together with a light film of lubricant and should swivel freely. A light sanding is usually all that’s required to take the surface down to bare metal. After a little bit of primer and paint, any company decals and unit numbers can be replaced as needed.

Our Aircraft Maintenance product line includes an Aircraft Maintenance Ladder, Aircraft Wing Inspection Ladder, Aircraft Wheel Well Ladder, Helicopter Maintenance Platform or we can custom design an Aircraft Maintenance Stand, Platform, or ladder. Our aluminum Aircraft Maintenance Ladders and Platforms are built for the long haul with worker safety and ergonomics in mind. Aircraft Maintenance Ladders and Platforms may be ideal for the following applications: Fixed base operations Airplane and jet maintenance and repair Helicopter maintenance and repair Wing and rotor inspections Please call and speak to our helpful, well trained staff for answers to your product questions, get a freight quote to your location or to purchase an aircraft maintenance ladder or platform. Refer to pricing tables for models, sizes and pricing. Prices are subject to change without notice. Diverse Supply, Inc. It is also a great idea to conduct a daily inspection. This can be quickly accomplished while your technician does other daily inspections or fluid level checks.Sounds like a delay that could have been prevented. It is also a great idea to conduct a daily inspection. This can be quickly accomplished while your technician does other daily inspections or fluid level checks. Since there are many types and manufacturers of aircraft towbars, the unit’s maintenance manual can really help to ensure all areas are covered. They are designed to break at a certain PSI limit to lessen the possibility of aircraft damage. They should be removed and checked for straightness, indentions, cracks and overall condition. If a shear pin is suspect in any way it should be replaced. The pushback operator was not quite quick enough on the brake, and the towbar head pivoted into both nose gear tires, cutting the side walls. Of course, the aircraft was towed back to the gate and the tires were replaced. Not a cheap undertaking when you consider the late aircraft and the price of tires and labor.

Your towbar will now be 100 percent serviceable and look better while performing its duty. Jason Chapman works in the company's GSE maintenance department and gained GSE mechanical experience with the U.S. Air Force and has worked in the commercial GSE industry for 12 years. All rights reserved. With a fully researched tooling database of over 600,000 items, across multiple aircraft types available to you, we are in a perfectly placed position to get you what you need on time and on budget. Just submit your items, and we do the rest. The GHW for helicopter EC145 comes from a very old design for BO 105. Using this background in 2009 LICO developed a new Ground Handling Wheel. Helicopter typeThe actuating lever is the multifunctional. Helicopter type. The Ground Handling Wheels can be installled on the helicopter?s landing gear. Each helicopter. Code. Subcategory. Aeronautica. This towbar for helicopters can be connected to any vehicle equipped with a coupling ball and is able to tow helicopters. Polyvalent tow bar with shock absorber. A large range of tow head family. Capability: 0 to 500 T Proposal force, we develop and propose innovating concepts in ground. Especially at highly frequency airports. The complete towbar as well as individual heads for replacement on existing towbars are available. We design our tow-bars in accordance with the requirements from aircraft manufacturers and. It features the same high quality construction. It has been made to sustain more weight in order to cater to as many helicopter types as. Balanced with the hydraulic cylinder located on centerline of the body.Fully retractable hydraulic undercarriage. Extra set of shear bolts included. Durable powder coat finish Utility Tug. Move equipment weighing up to 4,500 lbs. Easily move equipment quickly and safely in tight areas. The model 701D is collapsible for compact stowing. Optional ball hitch attachment for movement of small trailers. Powerful. All steel, alloy construction.

Trouble free design. Powder coated paint for durability. Simple Knock-Down design for easy transport. Automatic brake. Built-in rheostat. Adjustable height handle. Net weight 31 lbs (14.06. Suitable for all aircraft without wheel pants. (Aero-Pac has also version available for aircraft with wheel covers.). Easily change between different plane types. Proven concept, also for twin engine aircraft operation. Properties. You can use it a full day and recharge it when you finish the task. Forget old towbars, with the universal fitting you will save time and money. This cylinder raises or lowers the wheel carriage assembly to which the. Thank-you for your help. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

clx6210fx manual

When a paper passes between a heat roller and a pressure roller, toner adheres to the sur- face of a paper permanently. 2-24 Service Manual Samsung Electronics. If a toner cartridge is not suitable for the machine an error message is displayed. 2-26 Service Manual Samsung Electronics. On every mode Shading Correction and Gamma Correction are executed ahead, then processing is exe- cuted later. 2-27 Service Manual Samsung Electronics. Service Manual Samsung Electronics. Remove the Cover Rev Exit Ass’y. 4. Remove the two screws. Unlatch the two hooks before remove the COVER 2. Remove the two screws. Samsung Electronics Service Manual. Service Manual Samsung Electronics. Pull the Cover Middle Rear. 3. Done. Service Manual Samsung Electronics. Pull the Cover Middle Open. Pull the Reverse Ass'y from the SET in direction of arrow. 3-11 Service Manual Samsung Electronics. Pull the Cover Middle Ass'y from the SET in direction of arrow. 3-12 Service Manual Samsung Electronics. Color Start Starts a job in Color mode. Black Start Starts a job in Black and White mode. Service Manual Samsung Electronics. Color Start Starts a job in Color mode. Black Start Starts a job in Black and White mode. Service Manual Samsung Electronics. Check the message on the display. The toner cartridge is low, empty, or needs to be installed a new one. Service Manual Samsung Electronics. If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling, and go to step 3. Service Manual Samsung Electronics. Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. The machine will resume printing. Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Make sure that it is securely latched. Be careful not to pinch your 6. Close the inner cover.If you cannot find the jammed paper, or if there is any resistance removing the paper, stop pulling and go to step 6.

• clx-6210fx manual, clx6210fx manual, clx 6210fx manual pdf, clx 6210fx manual download, clx 6210fx manuals, clx 6210fx manual free.

This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions. HP is here to help! Learn More Click here Connect with HP support faster, manage all of your devices in one place, view warranty information and more. Learn more? Select from the products you own. Thus, the warranty has been removed from this product.Any warranty support needed would be completed by the third party that sold the product.Please use the product number and serial numbers of the new product to validate warranty status.Any warranty support needed would be completed by the reseller that sold the product.It matches the product: Please enter a Product Number to complete the request. Learn more about HP's privacy policy This process can take several minutes depending on the number of warranties being checked.We apologize for this inconvenience and are addressing the issue. Please try again shortly. This printer should only be serviced by a suitably trained and qualified service engineer. (2) Use only Samsung replacement parts There are no user serviceable parts inside the printer. Do not make any unauthorized changes or additions to the printer, these could cause the printer to malfunction and create electric shock or fire hazards. Do not touch the machine or the power cord if it is still connected to the wall socket in these weather conditions. Take care to note the exact location of parts and also cable routing before dismantling any part of the machine. Ensure all parts and cables are replaced correctly. After installation, double check that the printer is stable. Service Manual Samsung Electronics. Service Manual Samsung Electronics. Scan Area (CCD): Duplex ADF PICK UP ROLL.Next the Magenta (M) color image is created on the Toner Cartridge and transferred to the PTB. Followed by the Cyan (C) and Black (K) images. 2-21 Service Manual Samsung Electronics.

4-44 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Refer to the table below.) 4. Push the ENTER button then it will clear all memory. NOTICE: Always perform a memory clear after replacing the main board. Otherwise, the system may not operate properly. 4-47 Service Manual Samsung Electronics. NOTICE: When you test CCD, make sure that the cover is closed. 4-48 Service Manual Samsung Electronics. DADF Cover Open Error Time expired while reading data. Try again. Data Read Fail Check USB Mem. 4-49 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Press OK to toggle the message to Stop or If you select Stop by pressing OK on the Continue. Toner Low The corresponding color toner cartridge is Take out the toner cartridge and thoroughly shake it. Replace the toner Cartridge. 3. Scratch of OPC Drum. 4-56 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer 4-59 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Digital Printer Digital Printer Digital Printer Digital Printer Digital Printer 4-60 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Replace PTB Unit. Replace PTB Unit. 2. PTB belt damage.

4-13 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. To avoid tearing the paper, pull it out gently and slowly. 6. Close the front cover firmly. The machine will resume printing. 4-14 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. This report is automatically printed every 50 network scan jobs. 4-17 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. To print all reports and lists, select All Report. 4. Press OK when Yes appears to confirm printing. The selected information prints out. 4-18 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Options - shows various options set up in the printer.At this stage, the toner cartridge needs to be replaced. Check the type of toner cartridge for your machine. The warranty does not cover the replacement of the maintenance parts after their lifespan. 4-30 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Rotate the bushing on the right end of the roller toward the document input tray. CHECKING THE MACHINE'S SERIAL NUMBER When you call for service or register as a user on the Samsung website, the machine's serial number may be required. You can check the serial number by taking the following steps: 1. If the tray2 door closed, Closed message display LCD 4-42 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Reverse fan will auto - stop after 5 seconds and OFF message will be displayed. 4-43 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. LSU motor will auto - stop after 5 seconds and OFF message will be displayed.

A only) POWER SAVER This printer contains advanced energy conservation technology that reduces power consumption whThis equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provideWhen you change or examine the fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until you have another fuse cover. The 13 amp plug is the most widely used type in the UK and should be suitable. However, some buildings (mainly old ones) do not have norRefer to the system label to verify the presence of wireless devices. Wireless devices that may be in your system are only qualifiAll rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentYou can copy both sides of the ID Card like a driver’s license to a single side of paper. See Allows you to shift the speed buttons to access ID Copy Shift 18 2 page 40.Allows you to store freq. In this document are contains instructions and explanations on everything from setting up the device for the first time for users who still didn’t understand about basic function of the camera. Samsung CLX-6210FX user manual Files with a.pdf extension can be viewed and printed consistently by anyone, regardless of platfor. You may find documents other than justHad to replace the hard.We keep our list of direct Samsung CLX 6210FX - Color Laser - All-in-One driver and firmware links up-to-date so they are easy to find when you need them. Ask your question here.

4-63 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Remove the jammed paper. 1. Check the reverse top cover. Replace if required 4-73 Service Manual Samsung Electronics. Connect the CCDM with a belt 4. Check the connection correctly.Replace scanning unit Ass'y. 4-77 Service Manual Samsung Electronics Samsung Electronics Samsung Electronics Samsung Electronics. Inc Digital Voltmeter Image Output Terminal (Color print- Enhanced Capability Port er, Copier) Engine Control Unit Isopropy Alcohol EEPROM Electronically Erasable Inter Process CommunicationEPP Programmable Read Only Memory Enhanced parallel Port Service Manual Samsung Electronics. Quick Install Guide Provides information on setting up your machine and this requires that you follow the instructions in the guide to prepare the machine. Online User’s Guide Provides you with step-by-step instructions for using your machine’s full features, and contains information for maintaining your machine, troubleshooting, and installingWARNING Hazards or unsafe practices that may result in minor personal injury or property damage. CAUTION To reduce the risk of fire, explosion, electric shock, or personal injury when using your laser MFP, follow these basic safety precautions: CAUTION Do NOT attempt. Do NOT disassemble. Do NOT touch. FollThe ozone produced does not present a hazard to the operator. However, it is advisable that the machine be operated in a well ventilated area. If you need additional information about ozone, request your nearest Samsung dealer. MERCURY SAFETY Contains Mercury, Dispose According to Local, State or Federal Laws. (U.S.

Az elkepzelheto hogy a beegetomuben is csikos valamelyik henger? Ez mar 3 hiba egy egysegben. Ha talalok meg gumihengert benne, mivel szabad megtorolni? Szaraz pamut anyaggal, esetleg alkohol? Vagy semmivel? A fenti nyomtatohoz allitolag letezik olyan megoldas, hogy az utangyartott tonert is lehessen hasznalni. Tudtok errol valamit. A regebbieknel volt, hogy csippet raktunk bele. Ennel mi a helyzet. A samsung mindig valtoztatgat es mar azt a turpissagot is kitalaltak a csippek ellen, hogy a driver frissitest jelez, kozben a nyomtatonak tolt le uj firmwart es innentol kezdve megint csak gyari tonerrel megy. Ugyesek. Persze az utangyartok is resen vannak de valahogy a samsung mindig okoz meglepetest. Laci Samsung ML1610 (Xerox phaser 3117) lezernyomtato hibajelzes Sziasztok! Adott a cimben emlitett Xerox 3117 nyomtato, ami valojaban megegyezik a Samsung ML-1610-el, igy nem kell rogton eldobni:). A keszulek a mai bekapcsolastol kezdve nem mukodik. A statusz jelzo ledjevel szinte rogton csak pirosan (folyamatosan) vilagit es nem futtatja le a bekapcsolasi rutint. A keszulek utoljara kedden volt hasznalva es semmi gond sem volt vele (meg elotte sem), azota ki volt kapcsolva. Probaltam bekapcsolni ugy, hogy a cancel gombot nyomva tartottam mikozben a halozati kapcsolot atbillentem ekkor a ket LED viszonylag gyorsan valtakozva villog a toner kimelo led zolden, a statusz led pirosan, de egyeb dolog itt sem tortent. Samsung ML 2240 R32 R33 es a C19 ertekei (Megoldva) Sziasztok. Egy Samsung ML 2240 es lezernyomtatorol lenne szo. A main boardon levo R32 R33 es a C19 re lettem figyelmes amikor szetszereltem a keszuleket. Ugyanis feltunt, hogy nem ugy nez ki mint a gyari forrasztas. Az R32 igazsag szerint gyarinak nez ki mondjuk de le kellene ellenoriznem hogy nem e lett kicserelve. A mellette levo R33 meg egy vezetekkel at volt hidalva.A szerviz utasitasban nincs kapcsolasi rajz:( Pedig ha lenne mar kesz is volna a keszulek.

Mert nem csinalnak normalis szerviz utasitasokat mar tenyleg mert akkora titok a kapcsolasi rajz foleg egy ilyen egyszerubb nyomtatonal. A dragabbaknal altalaban meg van mellekelve kapcsolasi rajz is. Hat mar. Birom amikor hianyos paneleket kell kiegesziteni az mindeg kalandos mert altalaban pont az olyan keszulekhez nincs kapcsolasi rajz es akkor johet a talalgatas. Ha esetleg valakinek van errol a nyomtatorol kapcsolasa az is megfelel eligazodom rajza. Elore is koszonom az segitsegeteket! Udv! KDG Similar manuals: You can write in English language into the forum (not only in Hungarian). Be sure to check that it is the user manual to exactly the device that you are looking for. In our database Samsung CLX-6210FX it belongs to the category All in One Printer. A user manualSamsung CLX-6210FX is taken from the manufacturer, a Samsung company - it is an official document, so if you have any doubts as to its contents, please contact the manufacturer of the device Samsung CLX-6210FX directly. You can view the user manualSamsung CLX-6210FX directly online or save and store it on your computer.If you have any questions, you can ask them in the form below. Other users viewing this website will have the opportunity to help you solve your probem with Samsung CLX-6210FX. Remember that you can also share the solution. If you solved the problem yourself, please write the solution to the problem with Samsung CLX-6210FX - you will surely help many users by doing so.Ask a question - our users can help you. It can be assumed that most parts are interchangeable, however some machines may be modified so that supply items (toner, developer, imaging, and drum cartridges) may not be compatible.Please contact us for options. Precision Roller is in no way affiliated, sponsored or endorsed by these copyright owners or their affiliates or dealers This website uses a secure server to encrypt all sensitive information.

Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Samsung CLX-6210FX owners to properly answer your question. Ask a question About the Samsung CLX-6210FX This manual comes under the category Printers and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Samsung CLX-6210FX or do you need help. Ask your question here Samsung CLX-6210FX specifications Brand Turn the printer off, and make sure that the printhead is not hanging over the paper and that no paper remains in the printer. In that case you will receive a message that the cartridge is empty. The manual of the purchased cartridge usually contains the solution, if this does not work, it is advisable to contact the seller. Check if the cartridges or toners are full. If so, inkjet printers often require cleaning the printer, the cartridges have dried out, or the print head is broken. With laser printers, calibrating the laser printer is recommended. ManualSearcher.com ensures that you will find the manual you are looking for in no time. Our database contains more than 1 million PDF manuals from more than 10,000 brands. Every day we add the latest manuals so that you will always find the product you are looking for. It's very simple: just type the brand name and the type of product in the search bar and you can instantly view the manual of your choice online for free. ManualSearcher. com If you continue to use this site we will assume that you are happy with it. Read more Ok. By parts code you can check what other devices it is used. You can print your Parts List or export to Excel to further work with it. We only help you to create your parts list for request from your suppliers. Add your headers and comments. Use saved Parts Lists as templates to create new lists.

Change the contents of the old list and save it as new. You can add, delete list items, change headers, comments and quantity of spare parts. Thumbnail 5-2By submitting a comment, you are declaring that you agree with these rules: Although the administrator will attempt to moderate comments, it is impossible for every comment to have been moderated at any given time. You acknowledge that all comments express the views and opinions of the original author and not those of the administrator. You agree not to post any material which is knowingly false, obscene, hateful, threatening, harassing or invasive of a person's privacy. The administrator has the right to edit, move or remove any comment for any reason and without notice. Failure to comply with these rules may result in being banned from further commenting. Please do not offer the downloaded file for sell only use it for personal usage. Looking for other manual. Document preview No preview for this item!For this no need registration. May be help you to repair. You could suffer a fatal electrical shock. Instead, contact your nearest service center. Note! To open downloaded files you need acrobat reader or similar pdf reader program. In addition, Also some files are djvu so you need djvu viewer to open them. These free programs can be found on this page: needed progs If you use opera you have to disable opera turbo function to download file. If you cannot download this file, try it with CHROME or FIREFOX browser. Translate this page: Relevant PRINTER forum topics: Samsung clp300 fuggolegesen csikosan nyomtat Sziasztok. Az a gondom hogy tobb Samsung CLP 300-as nyomtatobol probalok egy mukodot csinalni, de meg mindig csikoz. A kepalkoto egyseget szetszedve kicsereltem a Igy nez kiA transfer belt is cserelve lett, azon is csikozas volt lathato. Es ezutan is szinte ugyanugy csikoz fuggolegesen. Ujra szetszedtem az OPC dobnal, most mindegyik gumihengernel teljesen egyenletes a szin.

All Samsung CLX-6210FX Toner Cartridges we sell come with 100% satisfaction guarantee. Enjoy great savings with the best quality cartridges for your Samsung CLX-6210FX Printer now. We ensure we always use the best delivery method to delivery the order to your door. As a general guide, deliveries to major cities will take 1 to 2 days whilst it could take up to 5 days for more remote areas.If your product is faulty, please check with us to organise a replacement or refund. See ourThere is no surcharge for using credit card or any other payment methods.Note: Direct deposit and cheque payments require payment clearance before order dispatch. Our site uses 256bit SSL encryption provided from GeoTrust ensuring your credit card details remain safe.You can also order Cartridges for Printers by calling our friendly sales team 1300 655 943 to place your order.Fantastic prompt delivery. Will definitely buy again from Ink Station! All trademarks referenced are the property of their respective trademark holders. Ink Station has no affiliation with Brother, Canon, Dell, Epson, Fuji Xerox, Hewlett Packard, Lexmark, Kyocera, Samsung and other manufacturers, or OEM, and nor has any arrangement been made with them to form the basis for any statement we make. Please note that due to the high volume of items listed on this website, there may be times when item names may vary from the product ordered. We delete comments that violate our policy, which we encourage you to read. Discussion threads can be closed at any time at our discretion. Nonetheless, there's a choice to fit an additional 250-page cassette. The result tray will stand up to 170 sheets at the very same time. Printing or scanning from USB flash drives can be executed from a USB.2 port on the front of the device. There is also an alternative to include an 80gb interior hard disk which enables a kept Jobs attribute that will certainly enable you to save data to the printer.

There are additionally several buttons to configure duplex as well as various duplicate setups. It can have been a lot far better to access these attributes with a menu on the 2-line monochrome LCD screen instead of the added switches on the panel. You are likely to adapt to the panel's style, but it could be simplified. If things get overly complicated for you, just type in the model of the Samsung printer you own. Wait while the download commences. Make sure you follow all the given instructions. Use the USB cable to check if your Apple computer recognizes the printer. Alternatively, connect the two via Wi-Fi but make sure both your computer and the printer are connected to the internet properly. Select All Processes off the dropdown menu and select all processes related to Apple Samsung Printer Drivers. Click the Quit Process option and select Quick. Click Run Analysis. Select Complete Uninstall and select Yes. Then Click Next, to starting the setup. For initial setup with Samsung CLX-6210FX printer not connected to the network, select 'Using a USB cable option', click Next to continue. Select your network, then click Next (Wireless Network Security Dialog appears). If you would like Wi-Fi Direct turned ON to make sure the checkbox is selected, and type down the password. Once selected, click Next to continue. Click Next or Finish to continue. Go to the Print and Scan in System Preferences to see your Samsung CLX-6210FX printer. If you want to scan, go to. We will continue to deliver goods to our customers across Australia You can contact us via Click Here, our professional and friendly printer specialists will help you to find the correct cartridge for you right away! Usually your Samsung CLX6210FX Cartridges will be dispatched from Melbourne, Sydney, Brisbane, Adelaide or Perth Warehouse the same day if ordered before 3pm. As a general guide, deliveries to major cities will take 1 to 3 days whilst it could take up to 5 days for remote areas.

See shipping policy page for detail. Privacy - We understand that your personal information is important. We will never pass your personal information to other 3rd party companies. Contact our specialists to help you. Please use the box above to search for any other information.Holding the handle on the new paper transfer belt, align it is parallel with the slots on the inside of the paper transfer belt. Checking replaceables. If you selected to print a supply information page.cassette feeder (Tray1)Document Jam. Close the DADF cover until it with this feature. See page 73. The machine is adjusting the color registration The ID or password you.The paper size specified in the table, cycle the power and try the printing job again. Clear the jam. Duplex Jam 0 Check Inside. Load paper in the DADF (or ADF). See page 73.Reduce the resolution and try again. You are any, the machine will work as Stop is waiting for a specified time interval to the available server. See page 75. Out-Bin Full. Clear the jam. The job which the arrow. Remove the toner cartridge and install a new one. If the problem persists, the machine may require repair. CONDITION Smears,. print quality such as loose toner or light imaging. Check the paper type and quality. If horizontally aligned black streaks or.Image rubs off frequently. Frequent copy paper jams occur. AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc. CurlSUGGESTED SOLUTIONS Clean the inside of time. See page 33. Because of the composition of copy paper remaining in the DADF (or. How do we fix this. I've checked everywhere and can't. (Posted by chanelle 8 years ago) Samsung CLX 6210FX - Color Laser - All-in-One Answers Paper Jams The main paper tray keeps jamming (paper will not feed through), but the manual feed tray will work. (Posted by ml35858 9 years ago) Samsung CLX 6210FX - Color Laser - All-in-One Answers How To Solve.

Paper Jam 0 Paper Jam 0 (Posted by Anonymous-30061 9 years ago) Samsung SCX 4826FN - Laser Multi-Function Printer Answers So for standard shipping business day,it is according to the image a minimum of 10 and.

clv s40 manual

The related devices were not found any abnormalities, so there was a possibility that the phenomenon was attributed to the user handling of the devices. The instruction manual of clv-s40 already mentions the appropriate device handling when clv-s40 has abnormalities. Olympus also checked the device history record of the subject device and there was no irregularity found. There were no further details provided. If significant additional information is received, this report will be supplemented. This report is being submitted as a medical device report in an abundance of caution. Patient Sequence No: 1, Text Type: N, H10 Olympus was informed that during the tur (transurethral resection) procedure the halation had occurred on the endoscopic image repeatedly. The facility replaced the otv-s7v connected to the subject device to another device to complete the procedure. There was no report of the patient's injury in this event. Patient Sequence No: 1, Text Type: D, B5. What is the condition? However, the majority of our capital products (Consoles, Camera Heads, Light Sources, Monitors, Drills, etc) are used. Esthetically, some items may have some slight signs of wear and tear due to being used in healthcare facilities prior to arriving in our warehouse. Please contact your sales representative to discuss all options. Our mission is to provide you with the best products at the best price. We get a lot of the same products that may have different cosmetic appearances, but they all function the same. Because of the volume of equipment we have, we only take one product picture for each model of every product. How do I import my equipment to my country? As long as we have everything in stock, your items will be invoiced and shipped in less than 3 business days. If you have a rather large order, please contact your sales rep for an accurate timing estimate. You should not attempt to use these products when treating a patient.

• olympus clv-s40 service manual, olympus clv-s40 manual, clv-s40 service manual, olympus clv-s40 user manual, clv s40 manual, clv s40 manual pdf, clv s40 manual download, clv s40 manual 2017, clv s40 manual free, olympus clv s40 service manual.

Olympus CLV-160 Service Manual. Olympus - CLV-160 by Olympus. Olympus clv s40 service manual keyword after analyzing the system lists the list of keywords related and the list of websites with related content, in addition you.Recent Olympus Visera CLV-S40 Endoscopy xenon. Service Technicians Endoscopy Forum Olympus Visera Clv-S40 Angelo Termini Dalslands Kliniken Hello there. CLV-190 EVIS LUCERA III XENON LIGHT SOURCE Maintenance Manual Issue 1 April 2012. CLV-S40 VISERA XENON LIGHT SOURCE Instructions June 2011.Serial number plate. This instruction manual contains essential information on using this light source safely and. Olympus. Country Of Origin. Germany Service manual (including Maintenance.You must now Send the olympus clv s40 service or 5EAEach20100material Tickets of any employees you like named off or had in any deception, and you must............. olympus visera clv s40 service manualolympus clv 190 manual pdf olympus cv 160. Olympus Clv 160 Service Manual.Recent Olympus Visera CLV-S40. OLYMPUS CLV-S40 SERVICE MANUAL DOWNLOAD NOW OLYMPUS CLV-S40 SERVICE MANUAL READ ONLINE storz xenon 175 service.Olympus otv-s7 video processor. Request a quote online or call 1-800-438-7662. 0 views. Connectable with conventional telescopes, fiberscopes, and VISERA videoscopes. Adaptable to all endoscopic procedures -The powerful and convenient CLV-S40 makes endoscopic procedures easier than ever.This is also true for the normal intensity mode. This maude entry was filed from a health professional,user faci report with the FDA on 2016-01-08 for OLYMPUS VISERA XENON LIGHT SOURCE CLV-S40 manufactured by Olympus Medical Systems Cooperation.Olympus checked the subject device with the other returned devices connected and confirmed all devices worked properly. Olympus could not determine which devices were contributed to the reported phenomenon because the phenomenon was not reproduced.

Crossed-out wheeled bin’ symbol VISERA XENON LIGHT SOURCE CLV-S40 Warns that the lamp and heat sink are hot. 1 Page 6 Labels and Symbols Lamp rating Electrical rating plate. Back cover of this instruction manual Manufacturer Authorized representative in the European Community 2 VISERA XENON LIGHT SOURCE CLV-S40 Page 7 Important Information — Please Read Before Use Important Information — Please Read Before Use Intended use This instrument has been designed to be used with an Olympus endoscope, Video system, accessories and other ancillary equipment for observation, diagnosis and endoscopic treatment. Do not use this instrument for any purpose other than its intended use. Instruction manual This instruction manual contains essential information on using this instrument safely and effectively. Before use, thoroughly review this manual and the manuals of all equipment which will be used during the procedure and use the instruments as instructed. Keep this and all related instruction manuals in a safe, accessible location. Videoscope This is an endoscope with a built-in CCD at its distal end to enable you to view images on a monitor without using a camera head. High intensity mode This mode provides brighter illumination than the normal intensity mode. Wall mains outlet An electrical outlet that has a terminal used exclusively for grounding. VISERA XENON LIGHT SOURCE CLV-S40 3 Page 8 Important Information — Please Read Before Use User qualifications The operator of this instrument must be a physician or medical personnel under the supervision of a physician and must have received sufficient training in clinical endoscopic technique. This manual, therefore, does not explain or discuss clinical endoscopic procedures. Instrument compatibility Refer to the “System chart” in the Appendix to confirm that this instrument is compatible with the ancillary equipment being used. Repair and modification This instrument does not contain any user-serviceable parts.

Broken items are great to purchase if you're using the working parts to refurbish other damaged items. However, the esthetic condition of the item shows clear signs of wear and tear. Primarily the sterilization and handling of the product. A product that has an expired condition has an expiration date that has already passed. A product that is In Date has an expiration date that is still valid. Unfortunately, due to certain circumstances, there are some countries we are unable to ship to. For more information, please visit. It has an automatic brightness control feature when connected to a camera console, saving time and energy for the user. It also can enter its Standby mode through a remote switch on the camera heads, allowing convenient use. Its lamp life meter is also useful to ensure its availability for scheduled procedures. It is equipped with an automatic brightness control when it connects to a camera console, eliminating the need to manually adjust the brightness settings and saving time and energy for the user. Another cost-saving feature is its Standby mode with a reduced light output, which prolongs life of the bulb and helps avoid accidental burns. This feature can be activated either by using the switch on the front panel or through a remote switch on the camera head. Its Xenon bulb can be used continuously for 500 hours (approximate), and a built-in lamp life meter helps anticipate when the lamp would need a replacement. This helps ensure that the Olympus CLV-S40 is available for use whenever the need arises. Olympus Instructions Visera Xenon Light Source CLV-S40 Manual Only Item Marked as Excess From a Local Government Agency You are the light of the world. Contact Us to Register Your Interest Already a member. If labels are missing or illegible, contact Olympus. ? Front side Lamp rating. Rear side Electrical rating plate Product name, rated voltage and serial number are described. CE marking Caution, refer to instructions.

Observe the following warnings on the illumination. ? Always set the minimum required brightness. The brightness of the image on a video monitor may differ from actual brightness at the distal end of endoscope. Especially, operating the electrical shutter function of a video system, pay attention to the brightness level setting of this instrument. When this instrument is used with a video system compatible with the automatic brightness control function, be sure to use the function of this instrument. The automatic brightness control function can keep the illumination light properly. Carefully withdraw the endoscope from patient and remove the blood or mucus in order to obtain optimum illumination and to ensure the safety of examination. If you continue to use the endoscope in such a condition, the distal end temperature may rise and cause mucosa burns. The intense light may harm your eyes. The part of the body to which a videoscope or electrosurgical accessory can safely be applied depends on the classification of the equipment to which the instruments are connected. Before beginning the procedure, review the current leakage classification type of each instrument that you will use for the procedure. Classification types are clearly specified on the instruments and in the instruments’ instruction manuals. Symbol Classification TYPE CF applied part TYPE BF applied part TYPE B applied part VISERA XENON LIGHT SOURCE CLV-S40 9 Page 14 Chapter 1 Checking the Package Contents Chapter 1 Checking the Package Contents Match all items in the package with the components shown below. Inspect each item for damage. If the instrument is damaged, a component is missing or you have any questions, do not use the instrument; immediately contact Olympus. Light source (CLV-S40) Foot holders (MD-512, 4 pcs.

Some problems that appear to be malfunctions may be correctable by referring to Chapter 8, “Troubleshooting”. If the problem cannot be resolved using the information in Chapter 8, contact Olympus. 4 VISERA XENON LIGHT SOURCE CLV-S40 Page 9 Important Information — Please Read Before Use Signal words The following signal words are used throughout this manual: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices or potential equipment damage. Indicates additional helpful information. Dangers, warnings and cautions Follow the dangers, warnings and cautions described below when handling this instrument. Leakage current from any applied part except “TYPE CF APPLIED PART” may be dangerous and cause ventricular fibrillation or otherwise seriously affect the cardiac function of the patient. Accordingly, always adhere to the following. Never apply an endoscope connected to any applied part except a “TYPE CF APPLIED PART” to the heart or any area near the heart. ? Never allow an accessory or another endoscope, which is in contact with the heart (or an area near the heart) to contact an endoscope connected to any applied part except a “TYPE CF APPLIED PART”. VISERA XENON LIGHT SOURCE CLV-S40 5 Page 10 Important Information — Please Read Before Use. For cardiac applications, use only instruments bearing the words “TYPE CF APPLIED PART” or the “ ” mark. Metal-to-metal contact can create an electrical connection and unintentionally conduct current to the patient (leakage current, for example). ? Keep liquids away from all electrical equipment. Explosion or fire may result because the instrument is not designed to be explosion-proof.

You're covered by the eBay Money Back Guarantee if you receive an item that is not as described in the listing. Find out more about your rights as a buyer - opens in a new window or tab and exceptions - opens in a new window or tab. All Rights Reserved. User Agreement, Privacy, Cookies and AdChoice Norton Secured - powered by Verisign. Sign in Don't have an account. Connectable to modern video scopes, fiberscopes, and VISERA. The strong and comfortable CLV-S40 makes endoscopic procedures simpler than ever before. It can also be used continuously for 500 hours (lamp life can differ slightly in sporadic use). Automatic Brightness Control— By connecting the CLV-S40 to video systems such as the Visera system via a light guide cable; brightness can be changed automatically, saving time and energy. Intensity-Mode Memory-Intensity-Mode Memory will still be in that mode when the CLV-S40 is turned off in high-intensity mode. This also refers to the normal mode of frequency. Easy-to-see Front Panel-Brightness and strength can be quickly changed with buttons and front panel switches. Ignition: switching lever Brightness adjustment: light-path diaphragm command Cooling: forced-air cooling Emergency lamp: 24V 150W halogen lamp (without a mirror) Emergency lamp life: approx. 500 hours of continuous use (Lamp life can vary slightly in intermittent usage) Front Panel Emergency Lamp Indicator: indicates that an emergency lamp is working or blinks when an emergency lamp is damaged Intensity-Mode Memory Indicator: indicates that Intensity-Mode Memory is selected Standby Mode Indicator: indicates that standby mode is selected Configuration Retention: selected settings are maintained when the origin is turned off. There are no reviews yet. No more offers for this product. The UHI-3 High Flow Insufflation System has an integrated smoke evacuation system. It provides optimal abdominal conditions that allow surgery to be more concentrated.

The large front panel screen allows you to take a look at critical data. Clear interior space for procedures that are clear to consider. When the smoke evacuation footswitch is linked to the UHI-3, mist removal starts with pedal depression. All you need to do is click the footswitch (optional) and smoke and mist will be removed so that during surgery you can keep your vision clear. Better and more ergonomic views reduce stress in the OR and enhance can procedure’s performance, health, and speed. To return to the preset pressure level, it can quickly respond to gas leakage. Automatic relief: The warning lamp and alarm are triggered when the abdominal pressure becomes too high and the pinch valve on the suction tube automatically opens to relieve excess pressure. Low noise design: the noise in the electromagnetic valve is held particularly low by an innovative mechanism. 3 Main Flow Settings: Flow rate configured to low, medium or high mode can be set easily. Check Glance Critical Data: Preset and current stresses are shown at the same time. By staying concentrated on what you are doing, you can easily monitor the necessary information. Medical Gas Pipeline Connectable: UHI-3 special pressure control system allows you to connect it to the medical gas pipeline of your hospital, removing the need for large, awkward gas cylinders. Olympus UHI-3 Insufflator Specifications: Flow Rate Settings: When power is turned on, low mode is selected. Size: Dimensions: 295 mm (W) x 340 mm (D) x 150 mm (H) (housing dimensions). We should be back up and running by 11:00 UK Time. Thanks for your patience. These cookies do not store any personally identifiable information. You can set your browser to block or alert you about these cookies, but some parts of the website will not then work. By continuing to use the website, you are agreeing to our Cookies Policy. You may have to register before you can post: click the register link above to proceed.

) Connector cover holder Power cord 10 Instruction manual VISERA XENON LIGHT SOURCE CLV-S40 Page 15 Chapter 1 Checking the Package Contents VISERA XENON LIGHT SOURCE CLV-S40 11 Page 16 Chapter 2 Instrument Nomenclature Chapter 2 Instrument Nomenclature 2.1 Symbols and descriptions. Output connector Connector for endoscope. Lamp Main lamp (xenon) Emergency lamp (halogen) High intensity mode. Lamp life meter Lamp life. Others Alternating current Circuit breaker Equipotential terminal Caution, refer to instructions. Brightness control switches 11. Emergency lamp indicator 5. Standby mode indicator 12. Brightness level indicator 4. Output connector 3. Connector cover 13. Intensity mode selector 2. Power switch 14. High intensity mode indicator 1. Power switch indicator 15. Lamp life meter 17. Emergency lamp switch lever 16. Standby switch 1. Power switch indicator The indicator lights when the light source is ON. 2. Power switch Press the switch to turned power ON or OFF. Press again to exit from the standby mode and reactivate the illumination light. 17. Emergency lamp switch lever When the switch lever is set to the “EMERGENCY LAMP” position, the emergency lamp (halogen) will turn ON. If the lever is set at an intermediate position, neither the main lamp (xenon) nor the emergency lamp (halogen) will turn ON. Be sure to set the switch lever to either the “MAIN LAMP” or “EMERGENCY LAMP” position. VISERA XENON LIGHT SOURCE CLV-S40 15 Page 20 Chapter 2 Instrument Nomenclature 2.3 Rear and side panels 1. VIDEO IN connector 4. AC inlet 2. SYSTEM connector 3. VIDEO OUT connector CE marking label 7. Equipotential terminal Rating plate 6. LIGHT CONT. connector 16 VISERA XENON LIGHT SOURCE CLV-S40 5. Circuit breakers Page 21 Chapter 2 Instrument Nomenclature Air vents Side bumpers Right side 8. Lamp access cover Air vents 9. Cover Power cord 10. The light can be unstable.

Prepare the instrument and other equipment that are used with this instrument before each use, according to the “System chart” in the Appendix. Refer to the instruction manuals for each equipment. VISERA XENON LIGHT SOURCE CLV-S40 19 Page 24 Chapter 3 Installation and Connection. Preparation of the lamp life meter Be sure to remove the orange tape. If the tape is attached, the lamp life meter will not work (see Figure 3.1). Tape lamp life meter Figure 3.1 20 VISERA XENON LIGHT SOURCE CLV-S40 Page 25 Chapter 3 Installation and Connection. Cover Figure 3.2 Hole Connector cover holder Figure 3.3 VISERA XENON LIGHT SOURCE CLV-S40 21 Page 26 Chapter 3 Installation and Connection. It is possible that some links will connect you to content onlyIn the case of any discrepancy in meaning, the English version is considered official. Thank. Learn more - opens in a new window or tab This amount is subject to change until you make payment. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab This amount is subject to change until you make payment. If you reside in an EU member state besides UK, import VAT on this purchase is not recoverable. For additional information, see the Global Shipping Programme terms and conditions - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab Learn More - opens in a new window or tab The item may have some signs of cosmetic wear, but is fully This item may be a floor model or an item that has been returned to the seller after a period of use. See the seller’s listing for full details and description of any imperfections. Contact the seller - opens in a new window or tab and request post to your location. Please enter a valid postcode. Please enter a number less than or equal to 1.

To start viewing messages, select the forum that you want to visit from the selection below. Our current inventoryIf there is a light source you are looking for that is not included on this page, pleaseThe technical data given in this publication is for general information only. All trademarks are property of their respective. Please call 216-762-0599 or contact us by eBay message for any questions or inquiries. Payment and Taxes Payment must be received within 4 days of any purchase or auction close. Payments: PayPal and international PayPal preferred (credits cards accepted through PayPal) Contact seller if alternative payment is required All payments must be received before any order will be shipped Taxes: reLink Medical is required to collect sales tax from non-exempt customers in states and localities where reLink travels or maintains a physical presence (nexus). The applicable amount of sales tax charged to an order will be calculated based on the shipment's destination state and local sales tax laws. Contact seller for instructions if you are a tax-exempt buyer. Packaging Bubble wrap, packing paper and boxes are selected to fit the items perfectly. All freight items will be palletized, shrink wrapped and strapped. If package is damaged upon receipt, please refuse the package so a claim can be filed with the carrier. Shipping and Local Pickup Domestic Shipping in Continental United States: Unless otherwise stated all orders sent to a continental USA location will be shipped via UPS, Fedex Ground or USPS Shipping cost is calculated by zip code and is available at the top of the page. Note some items may include free or fixed rate shipping. Freight quotes will be provided promptly upon request, or one can select Local Pickup and manage the transportation pickup and expense directly. Additionally, relink offers, and will quote, palletization services. Crating will require a charge for materials and labor.

Please contact seller to request a quote and have this charge added to your invoice. Orders are generally shipped within 24hrs of full payment receipt. Please allow at least 72hrs to process freight shipments. Shipping Internationally or Outside the Continental United States: Shipping outside of the Continental USA is the RESPONSIBILITY OF THE BUYER. Items will be packaged and palletized for shipping. If crating or any packaging above and beyond Share: Ratings and Reviews 4.9 Responses - 6, Ads - 7 701 5 6 4 0 3 0 2 0 1 0 100% Would recommend 96% Good value 100% Good quality Would recommend Good value Good quality Send a review Diego Cannavino Show the originalThank you I got Masimo equipment from Relink, the deal went great. Thank you Pulse oximeter MASIMO Rad-57, 11.06.2020 All comments ( 0 ) REPLY Your feed saved Send a reply Khairul Azhar Show the originalThe device is good. I am satisfied. I have already received the laparoscope from Relink. The device is good. I am satisfied. Laparoscope KARL STORZ 26046AA, 26.05.2020 All comments ( 0 ) REPLY Your feed saved Send a reply Barrett Norman Show the originalI bought the dialysis machine from reLink Medical Auction. Portable hemodialysis machine NXSTAGE System One, 27.11.2019 All comments ( 0 ) REPLY Your feed saved Send a reply Marco Rebelo Show the originalI'm extremely thankful for attention, professionalism, and quick response. Excelente persona. Estoy muy agradecido por la atencion, profesionalismo y disponibilidad mostrada. Convex Probe ALOKA UST-9123, 05.11.2019 All comments ( 0 ) REPLY Your feed saved Send a reply Kaiser Shen Show the originalThey charged 150 USD for shipping but I had to pay for ups when they arrive Which was another 150 USD No delays but seller was not clear about shipping fee. They charged 150 USD for shipping but I had to pay for ups when they arrive Which was another 150USD Corneal Topographer MEDMONT E300 W, 01.10.

2019 All comments ( 0 ) REPLY Your feed saved Send a reply Ilyas Dyusenov Show the original. You can log in. Login Enter another email address This phone number is already registered. Medical Contact seller for more information Email Address: Your mobile phone number: Your name and surname: Password: Fill in the field Russia Forgot your password. PASSWORD RECOVERY ? E-mail address is entered incorrectly Your phone number Fill in the field Russia Send SEND YOUR MESSAGE SENDED. THANK YOU The confirmation letter was sent to you email You will be contacted soon You've already responded to this Ad. Link to your chat: Bimedis processes personal data about users of our site, through the use of cookies to deliver our services, personalize advertising and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to the Bimedis Privacy Policy. By clicking ''I AGREE'' below, you agree to the Bimedis Privacy Policy and Bimedis’s personal data processing and cookie practices as described therein. Learn more I AGREE BUYER REGISTRATION SIGN IN REGISTER FACEBOOK GOOGLE OR Forgot your password. PASSWORD RECOVERY ? E-mail address is entered incorrectly Your phone number Fill in the field Russia Send SIGN IN FACEBOOK GOOGLE OR Fill in the field Russia I have read and agree to the terms and conditions I agree to Receive marketing materials GET STARTED.

clymac zp3 manual

The remaining ports are available for functions such as programming the panel via a PC, and for connecting to other entities such as PC-based graphics systems and building management systems, desktop printers and pager systems. These are switched outputs available as both voltage-outputs, and voltage-free contacts. Switched 24-volt dc outputs are used for operating system fire-alarm devices such as bells, sounders, indicators, and similar devices. These devices must have a voltage-free contact, which changes state when the device status changes. The contacts of the devices being monitored can be connected to interface units, which are on the Z-Loop, or in the panel attached to the ICB-bus, or remote from the panel attached to the SCB-bus. It is a compact microprocessor controlled unit, of modular design. Hardware and software modules enable virtually any system requirement to be exactly configured. Sounder-circuit outputs Up to 896 These inputs and outputs can be a mixture of any of. The basic panel is designed for surface mounting, and flush-mounting kits are available. The dimensions below apply to the basic panel. For details of optional mounting hardware, see the appropriate data sheets. It consists of a basic panel, which is fully functional, and available in 3 models, 1-loop, 2-loop, and 4-loop. All components are carried on two main modules; the internal chassis holds the main board and processor board, and the door-assembly holds the display board, the zone board, the keyboard, and the Zport1 connection. This unit comprises the panel display and control electronics as well as the keyboard, a serial connection for data loading, and the printer (if fitted). To change a setting, move the bracket to the selected item, and press enter. The parameters are dependent upon the programme being used.

• clymac zp3 manual, clymac zp3 installation manual, clymac zp3 manual, clymac zp3 manual.

It may not be photocopied, translated, or reduced to a machine readable form, in whole or in part, without the prior written consent of Ziton Ltd. It may not be distributed with changes or omissions, which have not been authorized by Ziton Ltd. The ZP3 panel is powered from a 230 volt AC primary supply and from a 24 volt DC battery backup supply.ZP3 fire alarm panels are available in 1, 2 and 4 loop versions, supporting up to 508 sensors per panel. Built-in peer-to-peer networking capability allows up to 100 panels and over 50,800 sensors to be connected together, providing scalability from small to very large systems. These are described in detail later in this manual.Peer-to-Peer Networking The ZP3 peer-to-peer network enables up to 255 standalone systems (verified up to 100 systems) to be integrated to provide system-wide alarm reporting, co-ordinated evacuation, cause-and-effect functionality, and control, for large systems and multi-building sites. The maximum number of panels supported by each software version is listed in the table below. Later software may support additional or different devices. Later software may support additional or different devices. If in doubt, check with Ziton. The following schematic diagram and description describe the architecture of a single panel. This configuration is repeated for each panel connected to the system. When high-power devices, such as loop-powered sounders are attached, then the length of cabling will be reduced. Refer to the Ziton ZP Wiring Guide before commencing system engineering or installation. The ZP3 panel incorporates one ICB-bus, with 1024 addresses, which can be either inputs or outputs. The addresses are shared with the external SCB-bus.The ZP3 panel incorporates one control-bus, with 1024 addresses, which can be either inputs or outputs. Refer to the address list for details. These addresses are in 2 groups. Two of these are reserved for the SCB-bus and the Z-Net communication.

The figures must not be exceeded in order to ensure safe, reliable, operation. Input Mains voltage. Therefore, in a fire condition, additional current is available for external fire alarm devices only, such as sounders.This section identifies installation criteria specific to the power supply. Mains cabling in its own conduit. The ZP3 fire alarm panel is intended for indoor use, and is rated IP30 according to BSEN60529:1992. The power supply forms part of the Main Board assembly, part no ZP3-MB2C. This assembly consists of a circuit board (incorporating the power supply), mounted on a metal chassis, with the power supply covered by a metal enclosure. The precautions and good practice recommendations must be complied with.A suitable bipolar isolating switch (circuit breaker) must be provided in the mains supply to the panel. This should not supply other equipment.Take care not to invert the battery connection polarity. If this should happen, replace fuse F1 (6.3 Amp, slow-blow, 250V, size 20mmx5mm).These optional boards are described in the Section 2 of this manual. The outputs of these boards are used to operate external devices such as sounders, indicators, and relays. This external supply must meet the following criteria. The power supply unit must incorporate two sets of voltage-free contacts, one which changes-over on mains failure, the other which changes-over on battery fault (disconnected battery, low or high voltage, etc), charger failure, or fuse failure. Firstly, the capacity of the power supply must be calculated to ensure that it will be able to supply the system load, even when the batteries are disconnected or discharged. Should the ZP3 PSU not be able to supply the system load, then either the system design will need to be modified, or a separate external power supply used for part of the load. This procedure is described in Section 3.3.

Additional ports are available as options for other functions, such as connecting into a Ziton ZP-NET network, connecting to graphics display computers, as well as to remote display units and remote control units. The hardware protocol is a RS232, being a screened 5-wire connection. The modem is addressed via the panels SSB (serial synchronous bus) - (7). Power down the panel and install the ZPAB-RS232 card (2) to Z-Port 1a (1) on the panel using the utility interface slot (9). If the modem is not disconnected the panel will report an Earth fault.Refer to the ZP-SCB guide for more information.The address range for the RDU is 0-63 this gives 64 available address options. The RDU is wired to the panel via the ZP3AB-SCB1 SCB driver board. Refer to the ZP-NET guide for more information. The cable is specified in detail in the Ziton Wiring Guide, but as a guideline it should be data quality cable with a conductor size of 0.5mm. The following options are available.Connecting this ribbon cable to the socket as shown above, automatically connects all auxiliary boards to the ZP3 main board. The auxiliary chassis is designed for simple installation, and to enable easy access to the main board after installation, for maintenance. This provides from 24 to 72 outputs within the ZP3 cabinet.The printer is depicted in the illustration below, with a description of the parts. A typical printout is also shown. Connecting a resistor of 1000ohms across these terminals reduces the sound volume about 50%.Remove the two screws (item 4) and remove the door. Disconnect power supply plug (item 5). Remove the four nuts (item 6) and remove the chassis.The chassis should be re-packaged by wrapping in a protective wrap (such as bubble-wrap), and then placed in the main panel carton.When used with 24-volt sealed lead acid batteries, this provides a complete primary and secondary power supply system. The illustration below shows the location of the main parts of the power supply system.

The board can be connected to the ZP3 panel auxiliary power supply terminals, or to an external 24 vdc power supply. If externally supplied, do not common the power supplies. The system requirements are built from standard hardware modules, and the functional requirements are software programmed into the panel. The software programming system is sophisticated and extensive, and includes facilities for meeting the needs of virtually any application, no matter how complex. The ZP3 fire panel displays fire and fault events by zone. Fire alarm input devices, such as sensors and callpoints, are assigned to a zone. Enter the point address for the point to be viewed.To add a new device to the zone, enter a new point address. To delete an existing device, display its point address and press the F1 key.Addresses can de added to or deleted from the list.Define the number of loops, number of zones, and number of communication ports.This can be done directly via the panel menu's, or it can be done off-line on a PC, using Ziton Planner software, and later loaded into the panel by means of a serial data connection. After being loaded into the panel, minor modifications can be done to the programming, directly via the panel menu's. Language The ZP3 panel has facilities for 2 languages, English and one extra language. This menu defines the default language that the panel will use. An alternative Foreign Language may be loaded - applicable to version 3.02 and higher. If unassigned, controls operate at level1, which is uncontrolled.The defaults are; fire relay (normally de-energised) and fault relay (normally energised).The time can be set between 0 (no delay) and 600 seconds.It is intended to provide broad guidelines, and is not intended to replace skilled engineering knowledge. Fire detection systems must be designed by persons with the necessary skill and engineering expertise, and system design must comply with the requirements of the authorities having jurisdiction.

Because of this, conduit and cable gland entry cannot be made at any point in the cabinet randomly, but is restricted to specific areas. The cable entry and wiring areas are shown below. It is aesthetically attractive, and can be surface mounted in almost any environment, including prestige buildings. The illustrations below give the main information for surface mounting. When installed in this manner it looks extremely attractive, and can be applied in the smartest environment. Two types of flush mounting kits are available, as described below. Both use the same collar, and look the same when installed. This tray fits on top of the ZP3 panel, and is designed for rear entry of conduit and cables. This is a neat and practical solution to the problem. These are simple actions, which will assist both with commissioning, and also provide stable long-term operation. Earthing The panel must be connected to a secure earth point. The loop is monitored for open and short circuit.For more information see ZP Wiring Guide, document no.These outputs provide 24 volts dc for driving sounders. They can be programmed to activate on a fire alarm from any zone or device, or as required. The relay contacts are rated for a maximum current of 1 ampere, and a maximum voltage of 24VDC, or 100 VAC.If these outputs are not used they should be terminated with a resistor of 2K2 ohms (2200 ohms).The ZP3AB-RL8 board connects to the ZP3 panel control bus. If allocated to the UserBus section, up to 768 addresses are available. These outputs are freely programmable. If allocated to the SystemBus section, a further 256 addresses are available, which have pre- programmed functions. If connected to an external 24 vdc power supply, then this will supply the load. If externally supplied, do not common the power supplies. If connected to an external 24 vdc power supply, then this will supply the load. If externally supplied, do not common the power supplies.

Dirty sensors can be sent to Ziton for cleaning. Advise all staff and the remote manned centre that testing is complete, and that any alarm now received must be treated as real.Advise all staff and the remote manned centre that testing is complete, and that any alarm now received must be treated as real.Both the alarm and fault outputs may be edited in this menu.It is equivalent to selecting both options above.The points displayed may be limited to a date range.If the two values are not equal, then code corruption has occurred. Stop printer This option cancels any print operation in progress.ZP3 Fire Control Panel Manual Page 1 - 14. The panel will treat devices giving out these readings as invalid.For some devices other value ranges are used to indicate such conditions as fault, service, pre-service and pre-alarm.The panel shall remain locked with key removed during operation.Although option is provided to software select up to 16 isolators, a maximum of 11 should be used if compliance with EN54 is essential. If the quality of the power feeding the panel is suspect and electrical noise is present, assistance should be sought from Ziton regarding earthing and surge protection. Earth Connection: The panels, power supplies and cables making up the fire detection system should be connected to earth at one point only. This may require a separate earth wire to be run to the panel.DC Control Lines Sounders, Control Relays, Door Magnets, etc.Each Z-Address line is a 2 wire circuit, which provides both power and data communication to the ZP fire and smoke sensors, call points, and addressable input and output interface units. This ensures that isolators will always receive a supply of at least 16-volts.For current draws and minimum line voltages see the applicable datasheets. Refer to Ziton if further assistance is required.

RS232 Ports Used for connection to graphics computers, building management systems and Ziton accessories, and for interfacing to building management systems. Each port usually connects to only one piece of equipment 4.2.1. Centronics Ports use a twenty way multicore cable, or ribbon cable, used to connect to printers. Universal pumps are suitable for positive or negative head installation conditions. Wiring diagrams. 52. 6.7 Troubleshooting. 56. 6.8 Diagnostics. 57. 6.9 Parts list. OfficeServ. 3.7 MISC 1 Card (only use in the iDCS 100 or DCS Compact-IIThe manual offers practical system installation guidance using an easy to follow format. It deals with the various system architectures using colour coding to identify the type of connection followed by individual installation information for each product. More detailed guidance is given separately for our specialist products, interfacing arrangements and cable types to ensure they are fully explained. Please make use of our Installation Helpline if you require any further support. Your call to the helpline goes directly through to our team of technical support engineers who are trained to provide an instant response. Beam detection 18. 22. 24. 26 Intrinsically safe equipment Radio equipment 58. 62. 68 14. Complying with BS 5839 Pt 1. Structural beams greater than 10% of ceiling height to be treated as wall. Applies to point detection and beam detection. 1m Detectors should not be mounted within 500mm of obstructions such as walls, beams or ductwork greater than 250mm in depth. 1m Detectors should be mounted minimum of 1 metre away from a forced ventilation system. Flue Accommodation 1.5m 18 Installation helpline 0844 412 1777 1.5m Book commissioning 01509 232651 Rack Rack 1.5m 19 1 Complying with BS 5839 Pt 1 Flue Accommodation 800mm Ceiling void 1.5m 1m 1.5m Rack Room Rack 1.

Normally off is the default setting.Auxiliary Board Addresses The ZP3 auxiliary boards can be set to assume any address in the SystemBus (group 9) or UserBus (group 10) address range. Auxiliary boards have 8, 16, or 24 points, which are addressed sequentially from a base address. Each auxiliary board represents a range of point addresses, either 8-way, 16-way, or 24-way. The address range is defined by the board address, which is set with a DIPswitch on each board. The purpose of the commissioning is to ensure that the system operates correctly, and the following areas must be checked:. Particularly check that all Z- loops are screened, and that the screens are continuous, and earthed at the panel.Z-loop wiring parameters These must be as specified in the Ziton ZP wiring Guide, publication GA322. (attached as Appendix W) As a guideline only: For a loop with sensors, callpoints, and interface units only, the total loop resistance must not exceed 75 Ohms (ie 37.5 ohms for positive leg and 37.5 ohms for. As a guideline, this must be high-quality, screened, data cable, with a maximum of 2000 metres of cable connected in any one network. This should be used for enabling a Status data message from a panel to a Maestro, and disabling it to all remote panels, which do not require it.Also refer to the ZP3 Language Loading procedure, which may be found in the Planner User Manual (UD1436). It will automatically revert to 0 if the panel is rebooted.This schematic shows a single ZP3 panel, together with some of the sensors, callpoints, sounders, and remote display panels, which constitute the make-up of a typical system. In addition to operating all the sensors, sounders, and other devices in the system, the control panel also provides the interface for the operator by means of its front panel fascia. The illustrations below give an overview of the control panel. Other indicators identify the nature of the alarm, and are described later. This indicator is normally off.

The LCD display can be used for other functions, which are described later.The alarm will display by zone or by category.Power On Indicates that the ZP3 panel has power, either from the mains or from the standby battery. Active Indicates that a sounder, remote alarm, or extinguishing system has been activated. Where applicable details of the alarms are shown by means of illuminated status indicators.Information is displayed on a 160character LCD screen.This feature is a pre-wired, independent circuit that turns on the Common Fault and System Fault LED's and sounds a buzzer in the event of total loss of power. The system will restore to normal.Record the action taken in the logbook. The system will restore to normal.This will restore any disabled sounders, as well as the remote manned centre alarm.The system will restore to normal.It allows reports of the status of the system, or individual devices, to be viewed or printed. It also allows previous alarms to be viewed or printed.Items that are grouped together are options that appear together on a menu, and items that are open- ended implement a software function.Options are available to limit the report to disabled points, or Gas Control Units.Once selected, the panel will report to the display any key pressed. The operator can use this function to check that the keypad is functional. Press any key twice to exit.These services are not the responsibility of the operator or in-house maintenance technician, and are not covered in this section of the manual. Important: If any defects are discovered during the routine testing, they should be recorded in the log book and action taken to have them corrected.Where possible, the panel will report the nature and location of the fault. Important: If any defects are discovered during the routine testing, they should be recorded in the log book and action taken to have them corrected.Exchange these points with replacement units, set to the same address.

5m Any area covered by automatic detection that contains a horizontal void of 800mm or more in height, automatic fire detection should also be provided in the void. 500mm clear space to be maintained below each detector. Flue Accommodation 1.5m 1.5m 1.5m A detector should be mounted within 1.5m away from a vertical shaft such as a lift at each level. Office Duct T 450mm 350mm Areas not covered R Beams not to run closer than 500mm to any wall, partition or obstruction. 20 Installation helpline 0844 412 1777 Book commissioning 01509 232651 21 1 Beam detection Addressable and conventional versions of the beam detector are available. The following notes describe the connections for both. When the Z2000 is used an additional 24Vdc supply is required. In addition to this the cable must be clearly identified by markers. It is also advisable to include a second cable for continuity checks during service visits. Clymac’s recommendations are therefore: Two number 4mm earth cables to the main earthing point for the building Both cables identified at regular intervals and either side of wall penetrations Notes All barrier equipment must be installed outside the hazardous zone One line conditioner can drive eight addresses One line galvanic isolator can drive either one I.S. beacon or two I.S. sounders. The output produced by the sounder is relatively low This equipment is made from non conductive material. The installer and user should ensure it is not installed in areas that would lead to a build up of electrostatic charge such as areas with high pressure steam Cleaning of equipment should be with a damp cloth The sounder circuits in the hazardous area not monitored for fault Screens used for alarm circuits and detector circuits must not be connected to building earth via conduit boxes or switch boxes ATEX Ex II1G Key I.S. conventional sounder Addressable sensor I.S. addressable sensor Addressable manual call point I.S.

addressable manual call point 230Vac ZB LC Line conditioner (ZP-LC) Zenner barrier (ZP-ZB) GI Galvanic isolator (MTL5025) 24Vdc alarm sounder 24 Installation helpline 0844 412 1777 Addressable sounder I.S. conventional beacon Book commissioning 01509 232651 25 1 Radio equipment Ceiling Wall 400mm ZR472 2 way unit i.e sensors, MCP’s and sounders. This type of unit must have an auxiliary PSU, as indicated. 150mm ZR471 1 way unit i.e sensors and MCP’s only. This type of unit can run without an auxiliary PSU, dependant on loop load. Please contact the helpline Wired addressable manual call point Radio addressable manual call point 26 Installation helpline 0844 412 1777 Radio addressable sounder Book commissioning 01509 232651 27 Duct detection AIR FLOW 1 Duct Z-DPU Duct Detector Z-DPU Duct Detector Clymac use two types of duct detector as shown. Also, in the absence of a screen the armour should be used. It should be noted that all efforts to avoid interference need to be made and ELV ducts must be used. Unit designed to be fixed to conduit box or similar with fixing centres 50-90mm apart. Devices should have two fixings in the conduit box to avoid the base spinning around when the heads are installed. Devices should have two fixings in the conduit box to avoid the base spinning around when the heads are installed.Learn how we and our ad partner Google, collect and use data. To ensure the ZP3 system continues to operate without false alarm or fault the system will require regular maintenance from a qualified engineer. MORE buttons denote more fires waiting to be shown see page 7. Also network systems will have panel number detailed. Once access is granted the system operates a 2 min timer from last button press before it logs the user out. Press either button to view the next event. The events will scroll around with each push of the corresponding more button.

Restore disabled alarm Used to enable previously disabled sounders quickly to facilitate an evacuation during routine maintenance. If pressed with access code when the system is in fire the alarms will activate. However, to view any type of event press the corresponding button to view zonal information followed by view points for further information. In carrying out this test the basic function of the system is also tested. This information should be cross referenced with the As-Fits for accuracy. 15 Cloudway Court Belton Road Loughborough LE11 1LW Tel: Fax: System Maintenance and Log Book To achieve this, the system remains User Guide (TO BE RETAINED BY USER) Issue 3 DB 4 Rev 3 April 2005 Screen shots updated and other minor changes K.Z. 4 Rev 4 September 2006 4 Rev COMPLIES WITH Singapore Standard: SS CP10: 2005 British Standard: BS EN54-2: 1998 BS EN54-4: 1998 REV.00 User Manual Each of these types of user can access a different set of functions. The and symbols next to the title of each procedure Graham Simons FIA Technical Manager DFU7001001 Rev 2 Please take the necessary precautions in not allowing any liquid to spill on or into the housing. The main law is the Regulatory Reform (Fire Safety) This section outlines our responsibilities as well as inspections and testing Interactive Fire Alarm System Release 3. Information Panel, BV-320. Protecting life, environment and property. Emergi-Lite Safety Systems Ltd Bruntcliffe Lane Morley Leeds LS27 9LL Neatly lay and securely fix cables. All rights reserved.All rights reserved.Please take the time to read your Welcome Pack carefully Please take the time to read your Welcome Pack carefully Policy for Fire Safety. Contents. 6. Prevention of fire Events taking place outside school hours Easy system programming through PC to panel.

Not to be reproduced without prior permission 23 AN INTRODUCTION TO YOUR LOG BOOK This fire safety User's Guide However, neither the authors nor Cooper Security However, neither the authors nor Cooper Security Limited Manual Version V01 DFU2000501 Rev 1 CONTENTS Important safety notes.3 Introduction.4 Fire alarm systems - an This section Quick Reference Guide It contains vital information on the operation and installation of your User Instructions SYSTEM OPEN 17:30 01 Jan ENT ESC. Setting the System. Unsetting the System RE SET To use this website, you must agree to our Privacy Policy, including cookie policy. The manual offers practical system installation guidance using an easy to follow format. If 10% of ceiling height consider as a wall Top 10% of void Top 125mm of void Detectors in unventilated voids to be mounted in the top 10% or 125mm, whichever is greatest. Partitions or racks within 300mm of ceiling to be treated as full height. Applies to point detection and beam detection. Structural beams greater than 10% of ceiling height to be treated as wall. 1m 1m 500mm 500mm Detectors should not be mounted within 500mm of obstructions such as walls, beams or ductwork greater than 250mm in depth. Detectors should be mounted minimum of 1 metre away from a forced ventilation system. 18 Installation helpline Book commissioning 12 Complying with BS 5839 Pt mm Ceiling void Rack Rack Room 500mm clear space to be maintained below each detector. Any area covered by automatic detection that contains a horizontal void of 800mm or more in height, automatic fire detection should also be provided in the void. Accommodation Flue 1.5m 1.5m 1.5m A detector should be mounted within 1.5m away from a vertical shaft such as a lift at each level. Office Duct T 450mm 350mm Areas not covered R Beams not to run closer than 500mm to any wall, partition or obstruction.

20 Installation helpline Book commissioning 13 Beam detection 1 Addressable and conventional versions of the beam detector are available. Clymac s recommendations are therefore: Two number 4mm earth cables to the main earthing point for the building Both cables identified at regular intervals and either side of wall penetrations Notes All barrier equipment must be installed outside the hazardous zone One line conditioner can drive eight addresses One line galvanic isolator can drive either one I.S. beacon or two I.S. sounders. The output produced by the sounder is relatively low This equipment is made from non conductive material. The installer and user should ensure it is not installed in areas that would lead to a build up of electrostatic charge such as areas with high pressure steam Cleaning of equipment should be with a damp cloth The sounder circuits in the hazardous area not monitored for fault Screens used for alarm circuits and detector circuits must not be connected to building earth via conduit boxes or switch boxes ATEX Ex II1G Key I.S. conventional sounder Addressable sensor 230Vac I.S. addressable sensor I.S. addressable manual call point Addressable manual call point Addressable sounder I.S. conventional beacon LC Line conditioner (ZP-LC) ZB Zenner barrier (ZP-ZB) 24Vdc alarm sounder GI Galvanic isolator (MTL5025) 24 Installation helpline Book commissioning 15 Radio equipment 1 Wall Ceiling 150mm 400mm ZR472 2 way unit i.e sensors, MCP s and sounders. This type of unit must have an auxiliary PSU, as indicated. ZR471 1 way unit i.e sensors and MCP s only. Please contact the helpline Wired addressable sensor Wired addressable manual call point Radio addressable manual call point Radio addressable sounder 26 Installation helpline Book commissioning 16 Duct detection 1 Z-DPU Duct Detector 244mm Clymac use two types of duct detector as shown. Fit temporary link between 6 and 8 for commissioning.

clv u40 manual

Keep this and all related instruction manuals in a safe, accessible location. If you have any questions or comments about any information in this manual, please contact Olympus. Terms used in this manual OES video converter, OES video system: Signup up today for the latest offers and discounts. Email. Menu manuals of all equipment which will be used during the procedure and use the equipment as instructed. Terms used in this manual OES video converter, OES video system: Signup up today for the latest offers and discounts. Email. Menu Equipment that has been disassembled, repaired, altered, changed, or modified by persons other than Olympus' own authorized service personnel is excluded from Olympus' limited warranty and is not warranted by Olympus in any manner. By actuating the Mode Selector, the light source can be set for any scope. From the EVIS 100, 130, 140, and 200 Series videoscopes to the OES fiberscopes and all rigid endoscopes.Manual override offers variable adjustment by the endoscopist. Manual override gives the endoscopist complete control of this function. Condition: Very good, fully functional. I have 1x Olympus CV-160, 3x Olympus CLV 145, 2x Olympus CV-145, 1x K-4 OLYMPUS suction pump, 7x Olympus CV-140 and 3x Olympus CLV U40. By actuating the Mode Selector, the light source can be set for almost any scope - from the EVIS 100, 130, 140, and 200 Series videoscopes can also be used with the Q180 series, but it voids the NBI functioning to the OES fiberscopes and all rigid endoscopes. Only in combination with 200 series scopes. Optimum Light Density Adjustment for Video Taping Automatically selects the ideal sensitivity required. Manual override offers variable adjustment by the endoscopist. Manual override gives the endoscopist complete control of this function. Built-In Emergency Lamp The CLV-U40 system includes a built-in 150W Halogen emergency lamp which is automatically actuated in the event of Xenon lamp failure.

• clv u40 manual, olympus clv-u40 manual, olympus clv-u40 service manual, clv u40 manual, clv u40 manual pdf, clv u40 manual download, clv u40 manuals, clv u40 manual instructions.

Sign in Forgot Password. My Bench Close Sign In Not A Member. Sign Up Join MedWrench OK name type Receive Summary Emails. FORUMS View All (1) Ask a New Question 1 Reply -Engr Zohaib 2 months ago 2 months ago Lamp Light not working Hello! Sir,It seems like a point is missing(ground). Please share service manual, Thanks for your response. Regard. Zohaib By continuing to browse the site you are agreeing to our use of cookies. Please review our Privacy Policy for more details. All Rights Reserved. It is able to fragment the hardest stones and the largest stone burdens efficiently in far shorter times than single action devices. Evis CLV-U40 Light Source For Sale Auction. Search and Browse hundreds of Medical Equipment Auctions on DOTmed.com Olympus CLV-U40 Xenon Light Source; Olympus CLV-U40 Xenon Light Source. Out of stock. MAKE AN OFFER. Part Number: CLV-U40. Compare; Contact On This Product. Request a quote online or call 1-800-438-7662.Olympus offers replacement instruction manuals for most models as free downloads. Softbound printed copies are also available for some models. To acquire these manuals or a variety of other Olympus reference documentation, follow the easy fr.dotmed.com Olympus CLV-160 Evis Exera Light Source Olympus Updated: 2007-09-10 With its improved condenser lens design and powerful 300W xenon lamp, the EVIS EXERATM 160 Series' dedicated light source, the CLV-160, is able to generate 30% more light intensity than its predecessor, the CLV-U40. Olympus Evis Exera lll CV-190 Video Processor. Request a Quote. Product details. Olympus Evis Exera lll CLV-190 Imaging System Xenon Light Source. Request a Quote. Product details. OLYMPUS EXERA II CV-180 HDTV Video Processor. Request a Quote. Product details. OLYMPUS EXERA II CLV-180 300W XENON LIGHT SOURCE WITH NARROW BAND IMAGING (NBI) Request a Quote. Product manuals of all equipment which will be used during the procedure and use the equipment as instructed.

Olympus CLV-U40 Features: Automatic sensitivity includes override capability for variable adjustment Trans-illumination confirms target area from outside the body Built-in emergency lamp automatically activates if main lamp fails Automatic exposure for still or Polaroid photography includes override capability for fine control Malfunction indicator provides instant information on malfunctions in the emergency system Olympus EVIS CV-140 Video Processor Features: Compatible with the full range of endoscopes from EVIS 100, 130 and 140 series endoscopes Wide screen image functionality with used in conjunction with Q series endoscopes such as GIF-Q140 and CF-Q140L Pre-set scope switch functions. Endoscopist has a choice from up to 20 pre-set endoscope switch functions Pre-program patient data.Get Latest Price from the seller We are a Sole Proprietorship firm and we source products from the reliable market vendors which can be availed from us at reasonable prices. We are also involved in offering best-in-class Surgical Equipments Repairing Services and Modular OR Projects And Services to our esteemed clients. Apart from this, we also export our products to US, Australia, Canada, China, South America, etc. Under the guidance of “Mr. Mehul Patel” (Owner), who holds profound knowledge and experience in this domain, we have been able to aptly satisfy our clients. Profound knowledge derives from appreciating the significance of individual pieces of knowledge or experience and fitting them together into a coherent network. It is clearly reflected in its corporate claim: “Sharing Expertise”. Sharing knowledge across all company divisions creates a broader, sounder knowledge base for everyone involved, resulting in far sighted, detailed solutions and maximum safety for the benefit of the patient and in the interests of the user.Get Best Deal I agree to the terms and privacy policy All rights reserved. Products and names mentioned are the property of their respective owners.

Transillumination Feature Increases illumination to allow confirmation of target area from outside the body. Automatically returns to original setting after approximately 7 seconds. We are here to help. You may be visiting our site outside of business hours or over the weekend. Please send us a message below with your questions and we will make sure to respond as soon as possible. Please hold on. Have you got a question. Write to us! We look forward to working with you. Up to 40 files of patient data can be pre-entered into memory to expedite procedure turn around Manual override offers variable adjustment by the endoscopist. Automatic Exposure Control for Still Photography Automatically sets light source at the optimum exposure for still or Polaroid photography. Manual override gives the endoscopist complete control of this function. Built-In Emergency Lamp The CLV-U40 system includes a built-in 150W Halogen emergency lamp which is automatically actuated in the event of Xenon lamp failure. Malfunction Indicator Any malfunction in the emergency system triggers the panel light malfunction indicator. Transillumination Feature Increases illumination to allow confirmation of target area from outside the body. Automatically returns to original setting after approximately 7 seconds. Incididunt sint officia non cow, ut et. Cillum porchetta tongue occaecat laborum bacon aliquip fatback flank dolore short loin ball tip bresaola deserunt dolor. Shoulder fugiat ut in ut tail swine dolore, capicola ullamco beef occaecat meatball. Laboris turkey in et chuck deserunt ad incididunt do.

When combined with the CV-160 video system center, the CLV-160 provides a system that is a full 80mm narrower and 35% smaller than previous Olympus models, allowing for the entire system to be installed on a dedicated cart together with a video monitor and other ancillary equipment. Via Stripe the best way to accept payments online and in mobile apps. We handle billions of dollars every year for forward-thinking businesses around the world. All rights reserved. Design by It Design Group. We are a non-profit group that run this service to share documents. We need your help to maintenance and improve this website. Please update your browser. We suggest using Google Chrome or Mozilla Firefox.La fuente de luz de xenon de 300 W proporciona aproximadamente una mayor intensidad de luz para imagenes mas claras y vividas para mejorar la observacion detallada. Solo en combinacion con los alcances de la serie 200. El ajuste de densidad de luz optimo para la grabacion de video selecciona automaticamente la sensibilidad ideal requerida. El control Manual ofrece un ajuste variable por el endoscopio. El Control de exposicion automatico para la fotografia fija automaticamente la fuente de luz en la exposicion optima para la fotografia fija o Polaroid. El control Manual proporciona al endoscopio un control completo de esta funcion. Lampara de Emergencia integrada el sistema CLV-U40 incluye una lampara halogena de emergencia incorporada de 150 W que se acciona automaticamente en caso de fallo de la lampara de xenon. Indicador de mal funcionamiento cualquier mal funcionamiento en el sistema de emergencia activa el indicador de mal funcionamiento de la luz del panel. La funcion de transiluminacion aumenta la iluminacion para permitir la confirmacion del area objetivo desde fuera del cuerpo. Vuelve automaticamente a la configuracion original despues de aproximadamente 7 segundos.

This page is part of GeneralManual.Com Network Olympus CLV-U40 Evis Universal Light Source User Manual. RSS. By operating the mode selector, the light source can be adjusted for any range. From the EVIS 100, 130, 140 and 200 Series videoscopes to OES fibroscopes and all rigid endoscopes. The manual override offers variable adjustment by the endoscopist. Manual override gives the endoscopist complete control of this function. It can automatically adjust its light density for video recording or still image capture, resulting to optimal image quality. It also ensures seamless operations with its emergency halogen lamp, allowing surgeons to complete their procedures even if the examination lamp fails. When combined with the 200 series scopes, it provides approximately 50 percent increased light intensity for clearer and sharper images enabling detailed observation during endoscopic treatments and interventions. It can also instantly adjust its light density for video recording while it automatically configure to optimum exposure on capturing still images. The user can still manually override these settings. If the examination lamp fails, it is equipped with a halogen emergency lamp which allows surgeons to complete the procedure. The emergency lamp can last up to 500 hours of continuous usage, making it a reliable back-up until the examination lamp is replaced. A smart Malfunction indicator lights up when there is any issue in the emergency system. Try selecting a filter (e.g. a category) or entering a keyword, then click elsewhere on the page: the store will show you how many search results your search will return, before you actually run the search. Please upgrade your browser or activate Google Chrome Frame to improve your experience. This new design and power assures clear, accurate observation even of distant points.

Connect the endoscope connector of the fiberscope to the light source referring to the instruction manual for the light source. 3. Push the video plug of the scope cable EXERA II into the video connector socket of the instrument all the way until it clicks, holding this instrument with a hand so that it will not move. Confirm that the “UP” mark points upwards (see Figure 4.3). 4. Connect the scope side connector of the scope cable EXERA II to the endoscope, referring to the instruction manual of the endoscope. Fiberscope and camera head 1. Ensure that this instrument and all connected devices are turned OFF. 2. Connect the endoscope connector of the fiberscope to the light source, referring to the instruction manual for the light source. 3. Push the video plug of the camera head into the video connector socket of the instrument all the way until it clicks, holding this instrument with a hand so that it will not move. Confirm that the “UP” mark points upwards (see Figure 4.3). 4. Connect the video adapter and camera head to the eyepiece section of the fiberscope, referring to the instruction manuals for the video adapter and camera head. Rigidscope and camera head 1. Ensure that this instrument and all connected devices are turned OFF. 2. Connect the light guide cable to the light source, referring to the instruction manual for the light source. 3. Push the video plug of the camera head into the video connector socket of the instrument all the way until it clicks, holding this instrument with a hand so that it will not move. Confirm that the “UP” mark points upwards (see Figure 4.3). 4. Attach the light guide cable, video adapter and camera head to the rigidscope, referring to the instruction manuals for the light guide cable, video adapter and camera head. Summary of connection Figure 4.4 4.3 Turning the video system center ON 1. Turn the ancillary equipment ON. 2. Turn the instrument ON by pressing the power switch (see Figure 4.5).

The indicator above the power switch lights up. Figure 4.5 3. The endoscopic image appears on the monitor (see Figure 4.6). Figure 4.6 4.4 Recall of user preset data 1. Press the “Shift” and “F2” keys together. The “User preset” menu appears on the monitor (see Figure 4.7). Figure 4.7 Figure 4.8 2. Click the desired user name in the user name dialog box. The selected user name is highlighted. 3. Check if the correct user name is selected, then click “Select”. The result of the adjustment will be displayed on the monitor for a few seconds (see Table 4.4). Table 4.4 6. If the adjustment failed, perform the operation of steps 4. and 5. again. 7. Switch to the normal mode by operating the mode button of the light source. The sub image appears on the monitor (see Figure 5.3). Figure 5.3 4. Press the “PinP” button to change the display. The transitions of the displays are different according to the settings in “Us. Figure 5.4 Figure 5.5 Image enhancement mode (ENH.) 1. Press the “ENH.” button to change the enhancement mode (see Figure 5.6). The indicator above the button lights up and the selected mode is displayed on the monitor for a few seconds. Figure 5.6 2. To switch OFF the image enhancement at any mode, press and hold the “ENH.” button. The indicator above the button goes OFF. Figure 5.7 Iris mode 1. Press the “IRIS” button on the front panel to switch between auto mode and peak mode alternately. The brightness level is displayed on the “EXPOSURE” indicator. STOP button and PC card indicator 1. Press the “STOP” button before removing the PC card. The PC card status indicator goes OFF. Figure 5.11 Table 5.3 PC card slot and eject button Figure 5.12 Table 5.4 1. Insert the xD picture card into the PC card adapter. 2. Push the PC card adapter all the way into the PC card slot. Figure 5.13 3. The video system center recognizes the PC card, and the PC card status indicator lights up green. 1. Press the “STOP” button. The PC card status indicator goes OFF (see Figure 5.

El CV-140 permite al usuario mejorar, congelar y ajustar la configuracion de color para proporcionar imagenes claras y precisas desde el interior del cuerpo. Estamos registrados por la FDA y respaldamos nuestros productos ofreciendo una garantia de devolucion de dinero del 100% sin condiciones si no estas completamente satisfecho. Zgrum Medical se especializa en cirugia Bariatrica, general, endoscopia flexible y rigida, ortopedica, traumatismos, columna vertebral y herramientas electricas, implantes y una variedad de otros equipos medicos y desechables. Llevamos todas las marcas de nombres principales de bariatric, cirugia general y urologia desechables, incluyendo suturas, grapas, tijeras armonicas y endocomo EndoGIA, eticon Echelon, alcances de Olympus, Pentax y Fujinon, camaras y fuentes de luz de Stryker, Storz y Linvatec. Tambien ofrecemos una linea completa de traumatismos ortopedicos, columna vertebral y herramientas electricas, incluyendo juegos modulares de manos sinthes, conjuntos de fragmentos pequenos y grandes, conjuntos de columna vertebral Stryker y Medtronic, ?Salon de 3 M Medtronic y mas. Zgrum Medical esta dedicado a ofrecer el equipo de marca mas alto al precio mas bajo. Nuestra presencia internacional nos permite proporcionar a nuestros clientes equipos medicos nuevos, usados y reacondicionados de marcas de confianza en 10-60% por debajo de los precios de los fabricantes. Nuestro volumen y compra proactiva nos permite ofrecer los precios mas bajos posibles a nuestros medicos, centros de cirugia, hospitales y vendedores de todo el mundo. Hemos estado sirviendo a la comunidad medica internacional de hospitales, centros de cirugia, medicos privados y dispensarios veterinarios en todo el mundo y somos expertos en envios a todo el mundo. ?We talk about espa to; OC. Llama a nuestro personal experto hoy al (520) 495-0391 o (888) ZGRUM88.

Mas informacion sobre nosotros en esta historia de Alibaba destacada Hemos estado sirviendo a la comunidad medica internacional de hospitales, centros de cirugia, medicos privados y dispensarios veterinarios en todo el mundo y somos expertos en envios a todo el mundo. ?We talk about Espa to; OC.Si encuentras algun problema con respecto a los resultados de la traduccion, tus sugerencias son bienvenidas. Toda la informacion del producto y del proveedor en el idioma o idiomas distintos del ingles que se muestra en esta pagina es informacion de www.alibaba.com traducida por la herramienta de traduccion de idiomas automaticamente. PinP composite terminal 14. PC card slot 15. Eject button 16. PC card status indicator 17. STOP button 18. Iris mode (IRIS) button 19. Iris mode indicators 20. Image enhancement mode (ENH.) button 21. Image enhancement mode indicators 22. VCR remote terminal 12. Fuse box 13. AC power inlet 14. Light control terminal 15. Light source terminal 16. Digital OUT terminal 19. PC OUT2 terminal 20. Monitor remote terminal 21. Composite OUT terminal 22. Monitor OUT terminal 23. Potential equalization terminal 2.3 Keyboard 1. F1 key 2. F2 key 3. F3 key 4. F4 key 5. F5 key 6. F6 key 7. F7 key 8. F8 key 9. F9 key 10. F10 key 11. F11 key 12. F12 key 13. Print screen key 14. Endoscopic image 12. Confirm that the brightness of the image on the monitor remains constant. Confirm that the light emitted from the distal end of the endoscope changes in your palm. 4. Hold the distal end of the endoscope 3 cm from your palm. Use a piece of gauze, etc.View the image on the monitor. 5. Confirm that the brightness of the image on the monitor changes when the light source's brightness level is changed. 3.4 Inspection of the monitor display 1. Turn the instrument ON. Confirm that the “UP” mark points upwards (see Figure 4.3). Figure 4.3 EVIS series videoscope and ultrasonic videoscope 1. Ensure that this instrument and all connected devices are turned OFF. 2.

14). Figure 5.14 2. Press the eject button. 3. Press the eject button again. The PC card adapter comes out slightly (see Figure 5.15). Figure 5.15 4. Pull the PC card adapter straight out. RESET button Table 5.5 1. Press and hold the “RESET” button on the front panel (see Figure 5.16). All front panel indicators should blink for about 1 second, then the settings are reset. Figure 5.16 5.2 Keyboard Domepoint 1. Press the domepoint using your finger tip. The arrow pointer on the screen moves to the direction corresponding to the pressed part of the domepoint. Figure 5.17 2. Move the arrow pointer to a text box area. Click the text box to place the cursor. Figure 5.18 3. Click a button on the menu to move the highlight, or perform the function of the button. Every time the two keys are pressed, the contrast mode changes. Image enhancement (“F9”) 1. Press the “F9” key to display the current enhancement mode for a few seconds. 2. During displaying the mode on the monitor, press the “F9” key to change the enhancement mode (ex. The indicator above the key lights up to show the tone selected. Figure 5.47 2. Press the arrow keys to adjust the level of the selected tone. 3. Press the “COLOR” key to select the next tone and adjust it the same way. Freeze (“FREEZE”) 1. Press the “FREEZE” key (see Figure 5.48) to freeze the endoscopic image. 2. Press the “FREEZE” key again and the frozen image returns to the live image. Figure 5.48 Release (“RELEASE”) Figure 5.49 1. Press the “RELEASE” key to record the endoscopic image on the recording devices assigned. The PC card status indicator lights up green (see Figure 5.56). Figure 5.56 2. Press the “FREEZE” key to pause the endoscopic image (see Figure 5.57). 3. Check the frozen image if it is suitable to record. If not, press the “FREEZE” key again to return to the live image and repeat steps 2. and 3. Figure 5.57 4. Press the “RELEASE” key (see Figure 5.57) to record the image. It may take around several seconds to record the images.

5. During recording, the PC card status indicator blinks orange, and the endoscopic image returns to the live image. PC card menu Figure 5.58 Basic operation of the PC card menu 1. Insert the PC card into the PC card slot. The PC card status indicator lights up green (see Figure 5.59). Figure 5.59 2. Press the “Shift” and “F4” keys together (see Figure 5.60). The message “Please wait” is displayed on the monitor, then the folder list screen appears (see Figure 5.61). Figure 5.60 Figure 5.61 Table 5.10 3. Click an image folder in the folder list. The patient data is displayed on the right side of the window. 4. Click “Load” or press the “Enter” key. The message “Please wait” is displayed on the monitor, then the thumbnail screen appears (see Figure 5.62). The thumbnail-sized images for the annotation image is not an image but an icon. Figure 5.62 5. Perform file operation such as playback and deletion of images, etc. 6. Click “Back” or press the “Esc” key to return to the previous screen. Or press the “Shift” and “F4” keys together to return to the endoscopic image. Formatting of the PC card 1. Display the folder list screen (refer to “Basic operation of the PC card menu” on page 111). 2. Click “Format” (see Figure 5.63). A confirmation message is displayed to ask if the card can be formatted. Figure 5.63 3. Click “No” to go back to the folder list screen instead of formatting. Click “Yes” to start formatting. During formatting, the message “Please wait” appears on the screen and the PC card status indicator of the video system center blinks orange. 4. The PC card status indicator lights up green after formatting has been completed and the message “Complete” appears on screen. A notification of normal or abnormal completion appears on the monitor. Playback images from the PC card 1. Display the thumbnail screen (refer to “Basic operation of the PC card menu” on page 111). 2. Click a thumbnail image to playback. The selected image should be edged with a thick frame.

The shooting date and time of the image are displayed on the right side of the window. Figure 5.64 3. Click “View” or press the “Enter” key. The message “Please wait” is displayed on the monitor, then the normal screen image selected appears (see Figure 5.65). Figure 5.65 4. Click “ ” to playback the images before and after the image currently being played back. 5. Click “Zoom”. The message “Please wait” is displayed on the monitor, then the full screen image appears (see Figure 5.66). Figure 5.66 6. Press the “Esc” key to return to the normal sized playback screen. Or press the “Shift” and “F4” keys together to return to the endoscopic image screen. Deleting images from a PC card 1. Display the thumbnail screen (refer to “Basic operation of the PC card menu” on page 111). 2. Click a thumbnail image to be deleted. The selected thumbnail is edged with a thick frame. The shooting date and time of the image are displayed on the right side of the window. Figure 5.67 3. Click “Delete”. A confirmation message appears on the monitor. 4. Click “No” to go back to the thumbnail screen instead of deleting. Click “Yes” to delete the selected image. 5. Click “Back” or press the “Esc” key to return to the folder list screen. Deleting folder from PC card 1. Display the folder list screen (refer to “Basic operation of the PC card menu” on page 111). 2. Click the image folder to be deleted. The patient data is displayed on the right side of the window (see Figure 5.68). Figure 5.68 3. Click “Delete”. A confirmation message appears on the monitor. 4. Click “No” to go back to the folder list screen instead of deleting. Click “Yes” to delete the selected folder. 5. Click “Back”, press the “Esc” key, or press the “Shift” and “F4” keys together to return to the endoscopic image. Annotation of images 1. Display the thumbnail screen (refer to “Basic operation of the PC card menu” on page 111). 2. Click “Annotate” (see Figure 5.69). Figure 5.69 3.

The annotation selection screen appears (see Figure 5.70). Figure 5.70 4. Click “ ” to scroll the thumbnail images if necessary. 5. Click the required thumbnail image. The selected image is edged with a thick frame. The shooting date and time of the image are displayed on the right side of the window (see Figure 5.70). 6. Click one of the position buttons on the screen. The number of the selected image appears at the position button and the selected image is edged with a thick frame in the color of the position button (see Figure 5.71). Figure 5.71 7. Select up to 4 images repeating steps 4. to 6., and then proceed with “Annotating” on page 121. Playback image annotation 1. Display the thumbnail screen (refer to “Basic operation of the PC card menu” on page 111). 2. Click an annotation icon to be played back. The selected icon is edged with a thick frame (see Figure 5.73). Figure 5.73 3. Click “View” or press the “Enter” key. The annotation screen appears on the monitor (see Figure 5.74). Figure 5.74 4. Click “Print” to print out the images on the video printer. A confirmation message appears on the monitor. 5. Click “No” to go back to the annotation screen instead of printing. Click “Yes” to print the images with the patient data and the comment. 6. Click “Back” or press the “Esc” key to return to the thumbnail screen. Playback the images using the personal computer 1. Insert the PC card into the PC card slot of the personal computer. If not, press the “FREEZE” key again to return to the live image and repeat steps 1. and 2. Figure 5.76 3. Press the “RELEASE” key (see Figure 5.76) to record the image. The indicator above the “PRINT QTY.” key indicates the number. 2. Press the “FREEZE” key to freeze the endoscopic live image. 3. Check the frozen image if it is suitable for recording. If not, press the “FREEZE” key again to return to the live image and repeat steps 2. and 3. 4.

Press the “CAPTURE” key or “RELEASE” key to capture the endoscopic image into the memory of the video printer. The CVP counter on the monitor increments by one (see Figure 5.81). Figure 5.81 5. When the number of images captured reaches the number of images to print on a print sheet, printing starts automatically. The indicator above the “PRINT” key lights up during printing. 6. To start printing before the number of images captured reaches the number of images to be printed on a print sheet, press the “PRINT” key anytime. The indicator above the “PRINT” key lights up during printing. 1. Press the “DEL IMAGE” key a number of times until the CVP counter shows the image number to be overwritten. Figure 5.82 2. Press the “CAPTURE” key or “RELEASE” key to overwrite the new image on the previous image. The “Patient Data” menu appears on the monitor (see Figure 5.84). Figure 5.83 Figure 5.84 2. Click the buttons with the arrow pointer to operate the menu. Table 5.17 3. Click “Back” to return to the endoscopic image. The next patient data input screen appears. 7. After finishing entering the data, click “Back” to return to the patient name list (see Figure 5.88). Figure 5.88 8. Click again “Back” to return to the endoscopic image. Displaying patient data 1. Press the “Shift” and “F3” keys together to display the “Patient Data” menu (see Figure 5.89). Figure 5.89 2. Click the desired patient name in the patient name list. 3. Click “Select”. The selected patient data is displayed on the endoscopic image. Editing previously entered patient data 1. Press the “Shift” and “F3” keys together to display the “Patient Data” menu (see Figure 5.90). Figure 5.90 2. Click the desired patient name in the patient name list. The selected patient name is highlighted. 3. Click “Edit”. The patient data input screen appears (see Figure 5.91). Figure 5.91 4. Click the data to be modified and place the cursor in the data area. 5. Enter the data in the text boxes. 6.